Make a pandora battery for psp fat

Like all noobs we are scared to open the battery, we might break it, we might get shocked. Quote: afterdawn fourms, aaron516

First thing is first.


What to use:


A small but STRONG metal object to remove the pin.


A sharp object to open the battery case

Some light.

Ok so when you take the battery out there are some creases along the sides of the battery. You want to apply allot of pressure to one side until there is a little whole. Take a knife, don’t be scared and stick it in the whole and drag it until the case starts separating it. Make sure not to stick the knife to far it because you might damage the battery.

*NOTE doesn’t apply the pressure tequnike to the side with the little bulge, becuase you might mess up the connection to the psp*

One you get it open it will look like this:

Slim PSP Batteries

 

PSP FAT BATTERIES

Just follow those pictures and you should have it done!

During the process of removing the pin some smoke might come up it’s all right its just electricity that has nowhere to go. Just don’t touch the bottom to little metal circles. Also DO NOT TOUCH ANY OTHER PINS WHILE DOING THIS it could ruin your battery.

Finally after you does it close it back up and put it in your psp.

If it turns on and the screen is black it’s normal. Once you put the memory stick in with the installer information stuff will show up.

If the psp says Pandora/ battery must be at 50% then charge it.

After the orange light goes away try it again no matter how fast the orange light takes to go away. If you still have the same problem you may have to let it train. This can be done by simply by plugging the ac adaptor in then turning it on then taking the ac adaptor out and leaving it on till it shuts off.


I AM NOT RESSPONSIBLE FOR BROKEN BATTERIES IT YOUR CHOICE AND USE THIS AT YOUR OWN RISK.

YOU NEED TO GET ANOTHER BATTERY AFTER HARDMODDING BECAUSE IT WILL NOT WORK NORMALLY ANYMORE.

*NOTE IF YOU RESOLDER (WHICH I HIGHLY DONT RECOMMEND) YOU CAN USE IT NORMALY*